LiteStep.net Forums :: Forums List :: The General Forum ::
Search ::

what are the system requirements of litestep? Thread last updated on 2003-12-19 12:44:00

Posted by member 82626 on 2003-11-12 10:46:14

what are the system requirements

cpu:?
internal memory:?
windows version:?

Posted by member 1316 on 2003-11-12 12:52:33 link

ok, basically, if your machine is running windows (windows9x or greater) then you can run litestep.

Posted by member 1783 on 2003-11-12 13:46:45 link

yup, if u have windows running, it means that u can use litestep. btw ls takes usually up even less resources than explorer (stress on 'usually').

Posted by member 35 on 2003-11-12 14:49:59 link

depending on the themes and modules used it will use elss or more resources, or require higer configurations (ie, if you want transparency, you'll need windows2000 or higher, if you want an analog clock, you'll also need gdi+).

Posted by member 94917 on 2003-12-19 06:55:48 link

what about Mhz and RAM ?

Posted by member 7223 on 2003-12-19 08:35:51 link

I'm running litestep on a 4Ghz Pentium with 1.5Gb RAM without any problem. LOL

Posted by member 35 on 2003-12-19 08:37:59 link

my brother uses the austerity theme in a p celeron 233 with 64mb of ram and win98 without problems.

Posted by member 94917 on 2003-12-19 09:05:36 link

so 266 Mhz with 194 RAM will too...

Posted by member 1 on 2003-12-19 09:08:21 link

I used to run LS on a 486 DX2 66 with 64M of RAM and a 20G HD.

Posted by member 7 on 2003-12-19 12:44:00 link

It was on my Pentium 90 with 48 MB RAM and 800MB hdd. That P90 is now running PureLS tho. :P